PHOTOLUMINESCENT 

Safety System with Photoluminescent Materials  

 

 

       

       Contact Us 


    Links     

    Near Real Time World Earthquake reports

  Quake Preparedness

 World Clock

  Currency Convertor

 Unit Convertor

  Translator

  World Weather 

 

 

 

Advantages

 

- good illumination of areas to be safeguarded

 

- good visibility of markings, diagrams, signs, telephones, fire extinguisher, rescue equipment

 

- good psychological effect inspires confidence and discourages panic

 

- perfect recognition of corners, turnings, taps, switches

 

- economical. Even small rooms or dead ends can be equipped with Photoluminescent products at minimal cost

 

- the layers of Photoluminescent materials are very thin, so they may be applied everywhere without decreasing the space of the passage. Wear-resistant paints can even be applied to floors

 

- Photoluminescent coatings are very robust and due to their thinness not in danger of mechanical damage. At the same time, they are resistant to mechanical strain. Even strong mechanical abrasion cannot lead to failure; at worst, the light intensity decreases, if part of the coating is knocked off

 

- Photoluminescent products are usually applied on large areas. Therefore, partial soiling does not impair the effectiveness. Their efficiency is only slightly affected by single objects or persons in front of the coated areas

 

- Photoluminescent products are usually applied in the form of a guidance line, on the floor or the lower part of the wall, so that this can be followed even in strong smoke by crawling

 

- Photoluminescent products are unconditionally suitable for use in areas with risk explosion

 

- the functioning of the Photoluminescent materials is guaranteed from 50 to 100 C

 

- provided the materials are given sufficient light before blackout, total or partial failures are impossible

 

- part of the lighting system providing energy to the materials may fail, but does not lead to failure of the materials; it only decreases the light intensity in an emergency

 

- all possible defects of the lighting system will be immediately obvious, such as breakdown of light installation, soiling of the Photoluminescent coatings or mechanical damage

 

- Photoluminescent systems function for more hours than electric systems, providing an aid to fire and rescue workers. The glow of the materials will not dazzle their dark-adapted eyes

 

- no additional expenses: This system needs no maintenance other than cleaning of and when necessary. No checks of functioning need be made. Visual inspections are sufficient.

 

Disadvantages:

 

- lower brightness than lamps

 

- decrease of light intensify as stored light is emitted. However, this decrease is compensated to a great degree by the adaptation of the eye to the decreasing light

 

- it is necessary to illuminate the evacuation routes at least from time to time

 

- the light intensity depends on the brilliance of the light prior to the blackout, and on the source of light.  

 

 

 


 

 

 

 


 

Glowmania USA Sales and Distribution Office

1424 Hamlin Avenue, Suite D

St. Cloud, FL 34771-8583

Phone: (407) 891-0551  Fax: (407) 891-0991

E-mail: enquiry@glowmania-us.com


        

Copyright © 1999 - 2007 Glowmania International Ltd   

 

Copyright: All material is original and remains the property of
Glowmania International Ltd  and may not be used without permission. No person is to use the enclosed information for inclusion in reports, publications etc etc without the consent of the Glowmania International Ltd

 

 

 

 

 

PHOTOLUMINESCENT

CRYSTALS

 

 

 

 

PATHWAY MARKERS

 

 

 

 

Events

 

 

 

ESCALATOR SAFETY

 

 

 

Marine

 

 

 

Navy

 

 

Space

 

 

Controls

 

 

 

Backboards